How to Change the Xenon Headlights on a 2001 Audi A4
- 1). Open the hood and secure it with the safety latch.
- 2). Remove the T25 Torx screws located at the top of the headlight using a T25 Torx screwdriver.
- 3). Remove the T25 Torx screws located on each side of the headlight. An extension can be used with the T25 Torx screwdriver to get a better reach.
- 4). Pull the headlight out and press the metal clip located behind the assembly to detach the headlight from the wire connector.
- 5). Pull the turn signal bulbs out. The bulbs are located on the side of the headlight assembly.
- 6). Remove the headlight back cover and press the metal clip behind the bulb to unplug the wiring.
- 7). Slide the xenon and high beam bulbs out of the headlight.
- 8). Insert the new xenon and high beam bulbs into the headlight. Wear disposable gloves to prevent oils from making contact with the bulbs.
- 9). Insert the metal clip to reattach the bulb to the wiring. Replace the headlight back cover.
- 10
Insert the signal bulb into the side of the headlight assembly. - 11
Insert the metal clip to reattach the headlight to the wiring. - 12
Replace the T25 Torx screws located on each side of the headlight. - 13
Replace the T25 Torx screw located at the top of the headlight. - 14
Test the headlight. Turn on the headlights to ensure proper installation.
Source...