How to Replace the Driver Side Glass in a 1987 Bronco II
- 1). Enter the driver seat of your Bronco with the driver door open fully. Use a Phillips-head screwdriver to remove the screws which fix the door panel and the door handle in place. Remove both pieces from the vehicle and place them in a safe area along with their screws.
- 2). Pull the inner door water protector away from the door carefully. This can be done by simply pulling it away from the door with your fingers until it comes free.
- 3). Remove the bolts from the window regulator that connect the regulator itself to the window pane. This can be done with a hex wrench. Place the bolts in a safe area because you will need to reattach them to the new window pane.
- 4). Lift the glass pane from the drivers door. You may wish to wear protective gloves it order to prevent you from damaging your hands on broken glass.
- 5). Place the new glass pane in to the door frame. Line up the regulator with the glass pane and secure them both together using the hex bolts. Reattach the rest of the door assembly by following the removal steps in reverse.
Source...