How to Put Spark Plugs in a 2000 Ford Taurus V6
- 1). Inspect the new spark plugs and check their gap with the plug gap gauge. Adjust the gap, if necessary. The recommended gap is 0.042 to 0.046 inch for OHV (overhead valve) engines and 0.052 to 0.056 inch for OHC (overhead cam) engines.
- 2). Raise the hood of your Taurus and check that the engine is cool before proceeding.
- 3). Locate the spark plugs, which are found in the cylinder heads, below the valve covers, on the OHV model engine. On the OHC model engine, the plugs are accessible through the valve covers.
- 4). Remove the plug wire from one spark plug at a time. If the engine has a separate coil for each plug, remove the screws securing the individual coil and set the coil aside. The screw is removed by turning it counter-clockwise.
- 5). Remove the spark plug with the plug socket and ratchet by turning it counter-clockwise.
- 6). Apply anti-seize compound to the threads of the new spark plug and install it into the spark plug hole. Tighten the plug by turning it clockwise with the plug socket and ratchet. If a torque wrench is available, torque the plug to 7 to 14 ft.-lb.
- 7). Replace the spark plug wire by pushing it back into place. If applicable, replace the individual coils by tightening their mounting screws in a clockwise direction. Repeat with remaining spark plugs.
Source...