How to Rotate Tires on an Acura Integra
- 1). Loosen all the lug nuts on each of the tires. Place a piece of wood under the back tires to keep the car from rolling while you jack up the front of the car.
- 2). Place the jack in the jack lift platform located under the front of the vehicle, and then lift the rear up on another jack stand, almost directly under the license plate. The easiest way to rotate the tires without a hydraulic lift is to raise the entire car up at one time.
- 3). Remove the front passenger side tire and roll it to the rear passenger side. Remove rear tire and replace with the front tire. Tighten lug nuts snugly, but not completely. Continue around the car until all tires have been changed.
- 4). Lower the rear first and replace the wood behind the tires. Lower the front end and then go around and tighten each lug nut to its tightest fit.
- 5). Keep tires on the same side if you have uni-directional tires. You can switch them to the opposite side only if they are remounted on the wheels.
Source...