How Do I Replace the Sensor for a Kitchen Jenn-Air Range?
- 1). Pull the oven away from the wall outlet, then unplug it from the power outlet.
- 2). Remove the rear panel of the oven by removing the screws around the perimeter of the panel.
- 3). Remove the mounting screws securing the oven sensor into position.
- 4). Pull the oven sensor out of the oven, then disconnect the wire connector.
- 5). Connect the new oven sensor's wire connector.
- 6). Insert the oven sensor into the slot on the oven, then secure it into position using the mounting screws.
- 7). Replace the rear panel, then restore power to the range.
Source...