How to Remove Asbestos Contaminated Vermiculite
- 1). Leave any insulation in your home untouched. Disturbing insulation can cause asbestos fibers to be kicked into the air you breathe, which can result in severe health risks.
- 2
Only use a certified contractor.construction,contractor,foreman image by Greg Pickens from Fotolia.com
Contact a certified asbestos contractor. The Environmental Protection Agency can help you locate a contractor within your state. - 3
Make sure that your contractor uses negative pressure enclosure.construction worker image by Greg Pickens from Fotolia.com
Ensure that your contractor uses a technique known as negative pressure enclosure. This technique encapsulates asbestos fibers, thus preventing the fibers from escaping into your home. - 4). Make sure that your contractor and his employees are following proper removal procedures. This means that employees should wear protective gear, leave insulation intact (not breaking it down), use a HEPA vacuum cleaner to clean the site and immediately remove the insulation once the insulation has been taken down.
- 5
Verify that your home is free of asbestos.home 3 image by Stacey Lynn Payne from Fotolia.com
Inspect your home once the asbestos has been removed. Your contractor must monitor the air within your home to verify that your indoor air is free of asbestos fibers.
Source...