How to Connect Two Different Toggle Switches for Lights on a Boat
- 1). Disconnect the boat's battery by removing the cable from the positive terminal with a wrench.
- 2). Cut the light's power wire at the toggle switch with wire cutters. Strip three-eighths inch of insulation off the end of each wire with wire strippers.
- 3). Loosen the two terminals on the back of the toggle switch with a screwdriver.
- 4). Wrap one of the wires around one of the terminals and tighten it down.
- 5). Wrap the other wire around the other terminal and tighten it down. Repeat this process to wire the other circuit to the other toggle switch.
Source...