How to Refill Copy Machine Cartridges
- 1). Order a refill kit for your specific copy machine cartridge. The Toner Refill Kits website has a simple ordering method for a number of manufacturers.
- 2). Remove the toner cartridge from your copier according to instructions in your manual. If you do not have the manual, visit the manufacturer's website to locate a manual or call its customer service department. Set the toner cartridge on a well-lighted surface in a ventilated room.
- 3). Remove the lid over the refill hole on your cartridge. Refer to the instructions that came with the refill kit if you don't see a lid. You may need to drill a refill hole using the kit. In that case, locate the spot indicated in the kit. Set the drill, which typically is included in the kit, over the spot. Push down firmly until it clicks down into place. Remove the drill.
- 4). Put the funnel from the refill kit into the hole. Pour in toner until the cartridge is full.
- 5). Cover the refill hole either with the original lid or with the piece of tape included in the refill kit. Wipe away any excess powder that may have spilled. Insert the cartridge back into the copier.
Source...