Instructions for Fixing Car Windows
- 1). Clean the window with a solution of detergent and water. Dry the window thoroughly.
- 2). Remove loose pieces of glass from within the crack. Wearing goggles, carefully pick out the pieces using the corner of a razor blade.
- 3). Create suction over the crack. Place the stabilizer on top of the cracked area and push down on it until intense suction is apparent.
- 4). Place the resin tube into the injector, and put the injector into the opening at the injector site on the suction stabilizer.
- 5). Remove the injector from the stabilizer. You will see the suction begin to draw the resin into the crack.
- 6). Take the stabilizer off the window, and place a strip of curing film over the repair.
- 7). Wait a few hours, or until the resin has dried, before removing the film.
Source...