How to Upload Maps to Etrex
- 1). Detach the Power/Data port cover, located on the back side of the unit, by pulling up its protective cover.
- 2). Connect the included data cable to the device's data port, then connect the other end of the cable to the computer. Turn the eTrex Legend on.
- 3). Insert the MapSource CD into the computer. Click on the "Send to Device" icon, or "Transfer," then "Send to Device." The eTrex Legend appears in the Device menu. If you do not see it in this menu, click "Find Device."
- 4). Click the check boxes next to each type of data you wish to send, such as maps. Click "Send" to begin transferring the maps to the GPS.
- 5). Remove the GPS from the computer when the uploading is finished, and turn the device off.
Source...