Front Control Panel

• 1). Disconnect the power to the dryer.
  
  
• 2). Remove the two screws on the rear of the top panel.
  
  
• 3). Lift the top panel up and off of the dryer.
  
  

Top Control Panel

• 1). Disconnect the power to the dryer.
  
  
• 2). Remove the lint screen, as well as the screws on the front of the lint-trap opening if located on the top panel of the dryer.
  
  
• 3). Insert a putty knife under the top-left and top-right of the front panel and release release the two spring clips securing the top of the dryer to the front panel.
  
  
• 4). Lift the top panel of the dryer up and rotate it 180 degrees.